New Case Study Book
KPS 110 mm 4″
Primary Containment Fuel Piping
Select Below
The KPS Petrol Pipe System™ is the most advanced and installer friendly piping system available for fuel and many other liquid and chemical applications. The KPS product range covers all piping needs.
Features And Benefits
- Engineered for easy installation: reducing cost and build time
- Compact fittings, elbows and tees
- Conductive (electrostatically safe) or non-conductive
- Suitable for petrol, diesel, Jet-A1 and ethanol blends (conductive).
For other uses, get in touch - Zero permeation: liquid/water tight
- Corrosion-free
- Lightweight
- Full technical support
- Installer training program
Approvals
- EN 14125
- German approval
- EN 13163-1
- ATEX 137 (directive 1999/92/EC)
Pipe
Article Number | Description | Remark | Ø (mm) | Length (m) |
---|

KP 110EC6 | Pipe 110 mm, conductive | Pipe 110 mm, 5.8 m lengths. 20 units / package | 110 | 116 m | |||||
KP 110EC18 | Pipe 110 mm, conductive | Pipe 110 mm, 18 m lengths. 1 unit / package | 110 | 18 m |

KP 110EC30 | Pipe 110 mm, conductive | Pipe 110 mm, 30 m coil. | 110 | 30 m |
Approved according to EN 14125, German standard, EN 13463-1, IP2 and ATEX 137 (directive 1999/92/EC).
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP CC-110 | Conductor 110 mm, conductive | 110 | 24 |
Connectors used to bridge joints thereby maintaining conductivity throughout the pipe system. Patented design.
Welding Sockets
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP 2-110 | Welding socket 110 mm | 110 | 10 | ||||||
KP 2-110R | Welding socket 110 mm, no pipe stop |
Slides over the pipe | 110 | 1 |
Bends, Elbows and Tees
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP 3-110FC | Bend 90° 110 mm, conductive | 110 | 1 | ||||||
KP 3-110FCL | Bend 90° 110 mm, conductive, long type |
45 cm extra length | 110 | 1 |

KP 4-110FC | Bend 45° 110 mm, conductive | 110 | 1 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP 23-110C02 | Elbow 90° 110 mm, conductive | Weldable | 110 | 5 |

KP 24-110C02 | Elbow 45° 110 mm, conductive | Weldable | 110 | 6 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP 8-110FC03 | Tee 110 mm, conductive | Equal tee | 110 | 5 |
Entry Seals
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP TM125/90 | Entry seal, pipe 125/110/90 mm | Threaded, no bolts necessary. Use hole saw Ø 168 mm. |
125/110/90 | 8 |

KP M160/90 | Entry seal, pipe 160 to 90 mm | Use hole saw Ø 168 mm. | 160/125/110/90 | 6 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP TM125/90B | Blind entry seal, pipe 125/110/90 mm |
Threaded, no bolts necessary. Use hole saw Ø 168 mm. |
125/110/90 | 10 |
Transition Fittings
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C17-110F | Transition fitting 110 mm, steel | 4" BSPT female / Rc 4" | 110 | 4 | |||||
KP C17-110FL | Transition fitting 50 cm stub, 110 mm, steel |
4" BSPT female / Rc 4" | 110 | 1 |

KP C17-110/90F | Transition fitting 110/90 mm, reduced, steel | 4" BSPT M/R 3" | 110/90 | 4 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C17-110M | Transition fitting 110 mm, steel | 4" BSPT male / R 4" | 110 | 4 |

KP C17-110ML | Transition fitting 50 cm stub, 110 mm, steel |
4" BSPT male / R 4" | 110 | 1 | |||||
KP C17-110/90M | Transition fitting 110/90 mm, reduced, steel | 4" BSPT M/R 3" | 110/90 | 4 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C16-110F | Transition fitting 110 mm, steel | 4" BSPT female / Rc 4" | 110 | 1 | |||||
KP C16-110FL | Transition fitting 50 cm stub, 110 mm, steel |
4" BSPT female / Rc 4" | 110 | 1 |

KP C16-110/90F | Transition fitting 110/90 mm, reduced, steel | 4" BSPT M/R 3" | 110/90 | 1 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C16-110M | Transition fitting 110 mm, steel | 4" BSPT male / R 4" | 110 | 1 | |||||
KP C16-110ML | Transition fitting 50 cm stub, 110 mm, steel |
4" BSPT male / R 4" | 110 | 1 |

KP C16-110/90M | Transition fitting 110/90 mm, reduced, steel | 4" BSPT M/R 3" | 110/90 | 1 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C20-110 | Stub flange, DIN flange and gasket 110 mm, steel | 110 | 2 |

KP C20-110L | Stub flange, 50 cm stub, DIN flange and gasket 110 mm, steel | 110 | 1 |

KP W6-110 | Separate threaded DIN flange 110 mm, steel | BSPT 4" female / Rc 4" | 110 | 1 |
KP C20-110/90 | Stub flange, DIN flange and gasket 110/90 mm, steel | With plastic plug that seals the test port. Threaded, no bolts necessary. Use hole saw Ø 168 mm. | 125/110 | 2 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP C14-110/90M | Transition fitting, 110/90 mm, reduced, brass | 4" BSPT M/R 3" | 110 | 1 |
Article Number | Description | Remark | Ø (mm) | Pack Size |
---|

KP F16-110MM | Flange fitting | 4” BSPT male-male / R-R 4” | 110 | 1 | |||||
KP F16-110MF | Flange fitting | 4” BSPT male-female / R-Rc 4” | 110 | 1 | |||||
KP F16-110FF | Flange fitting | 4” BSPT female-female / Rc-Rc 4” |
110 | 1 |