KPS 125/110 mm 4″

SECONDARY CONTAINMENT PIPING

Select Below

The KPS Petrol Pipe System™ is the most advanced and installer friendly piping system available for fuel and many other liquid and chemical applications. The KPS product range covers all piping needs.

Features And Benefits

  • Engineered for easy installation: reducing cost and build time
  • Compact fittings, elbows and tees
  • Conductive (electrostatically safe) or non-conductive
  • Suitable for petrol, diesel, Jet-A1 and ethanol blends (conductive).
    For other uses, get in touch
  • Zero permeation: liquid/water tight
  • Corrosion-free
  • Lightweight
  • Full technical support
  • Installer training program

Approvals

  • EN 14125
  • German approval
  • EN 13163-1
  • ATEX 137 (directive 1999/92/EC)

Pipe

Conductive Pipes With Permeation Barrier And Secondary Containment

Article Number Description Remark Ø (mm) Length (m)
KP 125/110SCEC6 Pipe 125/110 mm,
secondary contained conductive
Pipe 125 mm, primary 110 mm,
5.8 m lengths, 12 units per package
125/110 70 m
KP 125/110SCEC12 Pipe 125/110 mm,
secondary contained conductive
Pipe 125 mm, primary 110 mm,
11,8 m lengths, 12 units per package
125/110 142 m
KP 125/110SCEC30 Pipe 125/110 mm,
secondary contained conductive
Pipe 125 mm, primary 110 mm,
30 m coil
125/110 30 m
KP 125/110SCEC50 Pipe 125/110 mm,
secondary contained conductive
Pipe 125 mm, primary 110 mm,
50 m coil
125/110 50 m

Approved according to EN 14125, German standard, EN 13463-1, IP2 and ATEX 137 (directive 1999/92/EC).

Conductive Connectors For Pipe Joints

Article Number Description Remark Ø (mm) Pack Size
KP CC-110 Conductor 110 mm, conductive 110 24

Connectors used to bridge joints thereby maintaining conductivity throughout the pipe system. Patented design.

Welding Sockets

Welding Sockets For Secondary Containment

Article Number Description Remark Ø (mm) Pack Size
KP 2-125/110SC Integrated welding socket 125/110
pipe, secondary contained
125/110 12
KP 2-125/110SCA Integrated Welding Socket 125/110
pipe, 360° secondary contained.
125/110 8
KP 2-110 Welding socket 110 mm 110 10
KP 2-110R Welding socket 110 mm,
no pipe stop
Slides over the pipe 110 1

Termination Fittings

Secondary Contained Termination Fittings

Article Number Description Remark Ø (mm) Pack Size
KP T125/110SC2A Termination fitting 125/110 mm With swiveling elbow test port fitting.

125/110 8
KP T125/110SC20 Termination fitting 125/110 mm With straight test port fitting.

125/110 8
KP T90025 Ball valve 1/4 for test port 1
KP T125/110B Termination fitting 125/110 mm No test port, for burial in soil 125/110 8

Bends, Elbows and Tees

Conductive Secondary Contained Bends And Elbows With Permeation Barrier

Article Number Description Remark Ø (mm) Pack Size
KP 3-125/110SCEC Bend 90° 125/110 mm, secondary
contained conductive
125/110 1
KP 33-125/110SCC Moulded elbow 90° 125/110 mm,
secondary contained conductive
Sharp radius 125/110 4
KP 4-125/110SCEC Bend 45° 125/110 mm,
secondary contained conductive
125/110 1

Conductive Weldable Elbows

Article Number Description Remark Ø (mm) Pack Size
KP 23-110C02 Elbow 90° 110 mm, conductive Weldable 110 5
KP 24-110C02 Elbow 45° 110 mm, conductive Weldable 110 6

Conductive Tee With Permeation Barrier

Article Number Description Remark Ø (mm) Pack Size
KP 8-110FC03 Tee 110 mm, conductive Equal tee 110 5
KP8-125/110SCEC Tee 125/110 mm, secondary contained conductive Equal tee 125/110 1

Entry Seals

Integrated Entry Seals And Termination Fittings

Article Number Description Remark Ø (mm) Pack Size
KP TM125/110SC2A Entry seal and termination fitting With swiveling elbow test port fitting. Threaded, no bolts necessary. Use hole saw Ø 168 mm. 125/110 6
KP TM125/110SC20 Entry seal and termination fitting
with pre-mounted transition fitting
to DIN flange DN 80
With plastic plug that seals the test port. Threaded, no bolts necessary. Use hole saw Ø 168 mm. 125/110 2
KP T90025 Ball valve 1/4 for test port 1
KP TM125/90 Entry seal, pipe 125/110/90 mm Threaded, no bolts necessary. Use hole saw Ø 168 mm. 125/110/90 8

Blind Entry Seal

Article Number Description Remark Ø (mm) Pack Size
KP TM125/90B Blind entry seal, pipe
125/110/90 mm
Threaded, no bolts necessary.
Use hole saw Ø 168 mm.
125/110/90 10

Transition Fittings

Female Transition Fittings, Conductive, HDPE To Steel

Article Number Description Remark Ø (mm) Pack Size
KP C17-110F Transition fitting 110 mm, steel 4" BSPT female / Rc 4" 110 4
KP C17-110/90F Transition fitting 110/90 mm, reduced, steel 4" BSPT M/R 3" 110/90 4
KP C17-110FL Transition fitting 50 cm stub,
110 mm, steel
4" BSPT female / Rc 4" 110 1

Male Transition Fittings, Conductive, HDPE To Steel

Article Number Description Remark Ø (mm) Pack Size
KP C17-110M Transition fitting 110 mm, steel 4" BSPT male / R 4" 110 4
KP C17-110/90M Transition fitting 110/90 mm, reduced, steel 4" BSPT M/R 3" 110/90 4
KP C17-110ML Transition fitting 50 cm stub,
110 mm, steel
4" BSPT male / R 4" 110 1

Female Transition Flange Fittings, With Spacer, Conductive, HDPE To Steel

Article Number Description Remark Ø (mm) Pack Size
KP C16-110F Transition fitting 110 mm, steel

4" BSPT female / Rc 4" 110 1
KP C16-110/90F Transition fitting 110/90 mm, reduced, steel 4" BSPT M/R 3" 110/90 1
KP C16-110FL Transition fitting 50 cm stub,
110 mm, steel
4" BSPT female / Rc 4" 110 1

Male Transition Flange Fittings, With Spacer, Conductive, HDPE To Steel

Article Number Description Remark Ø (mm) Pack Size
KP C16-110M Transition fitting 110 mm, steel

4" BSPT male / R 4" 110 1
KP C16-110/90M Transition fitting 110/90 mm, reduced, steel 4" BSPT M/R 3" 110/90 1
KP C16-110ML Transition fitting 50 cm stub,
110 mm, steel
4" BSPT male / R 4" 110 1

Conductive Stub Flanges, DIN Flanges And Gaskets For Pipe Termination

Article Number Description Remark Ø (mm) Pack Size
KP C20-110 Stub flange, DIN flange and gasket 110 mm, steel 110 2
KP C20-110L Stub flange, 50 cm stub, DIN flange and gasket 110 mm, steel 110 1
KP W6-110 Separate threaded DIN flange 110 mm, steel BSPT 4" female / Rc 4" 110 1
KP C20-110/90 Stub flange, DIN flange and gasket 110/90 mm, steel With plastic plug that seals the test port. Threaded, no bolts necessary. Use hole saw Ø 168 mm. 125/110 2

Compression Transition Fittings, Conductive, HDPE To Steel

Article Number Description Remark Ø (mm) Pack Size
KP C14-110/90M Transition fitting, 110/90 mm, reduced, brass 4" BSPT M/R 3" 110 1

Flange Fittings

Article Number Description Remark Ø (mm) Pack Size
KP F16-110MM Flange fitting 4” BSPT male-male / R-R 4” 110 1
KP F16-110MF Flange fitting 4” BSPT male-female / R-Rc 4” 110 1
KP F16-110FF Flange fitting 4” BSPT female-female / Rc-Rc 4” 110 1

Download Our NEW Case Study Book Featuring 150 Installations